12
OAWA3 Wireless Transmitter/Amp-Receiver System
Remote Control Operation
All functions of the OAWA3-r may be controlled by the Remote Control,
as long as the IR cable is connected. There are no control functions on
the OAW3-t Transmitter or OAWA3-r Receiver/Amplifier units them-
selves.
On/Off - each press cycles the amplifier On or Off. Amplifier
status is indicated by its BLUE LED.
Mute - each press cycles the amplifier output Mute or Un-
Mute.
Volume Up (+) or Down (–).
Advanced Functions
The OAWA3-r is designed with advanced func-
tions that configure the Left and Right output
channels to: Left, Right and Mono
These functions are addressed through the sys-
tem programming feature "PRO."
Please see the section titled Programming the
Amplifier for Advanced Operation (pg. 13)
Operational Configurations
Bi-Amping
Use one OAWA3-r Receiver/Amplifier on each speaker to power its LF and HF Sections inde-
pendently; see Bi-Amp set-up instruction (pg. 14). Program the Left speaker's amplifier to
operate in the “LEFT” mode; see Programming section (pg. 13). Similarly, program the Right
speaker's amplifier to operate in the “RIGHT” mode.
Commercial/Distributed Audio Mode
Connect the OAW3-t Transmitter to the desired audio signal source. Program each OAWA3-r
Receiver/Amplifier to operate in the Mono mode so that each speaker will play the full audio
input, making it unnecessary to use "stereo pairs" of speakers. This will enable a fully expand-
able sound system to operate within range of the Transmitter.
Amplifier Channel
Mode
Left
Right
Stereo
Left
Right
Left
Left
Left
Right
Right
Right
Mono
Left+Right
Left+Right
Remote Control Operation
