Instruction Manual
5
System Function
System Function Description
The OAWA3 System is designed to wirelessly transmit an audio source signal from one loca-
tion to a dedicated wireless audio amplifier. The audio amplifier is then connected to any
general purpose loudspeaker.
The OAW3-t Transmitter is a high performance device that broadcasts digital audio over
the 2.4 GHz band. Analog input signals are converted to digital format for transmission. The
radio frequency broadcast is digital, uncompressed, CD quality data. The broadcast signal is
uniquely formatted so that either the Outlaw Audio OAW3-r or OAWA3-r Receiver can receive
and convert it into useful audio output.
The OAWA3-r Receiver/Amplifier is readily configured to drive a pair of 8 Ohm speakers in
Stereo mode.
NOTE:
There is also the capability to use the OAWA3-r Receiver/Amplifier for more spe-
cialized functions. These functions are covered in the section "Advanced Functions"
(pg 12)
Both the OAW3-t and OAWA3-r receiver are equipped to operate with 3 different Zones. Each
Zone is a unique formatting of the broadcast digital data so that components operating and
linked on one Zone will not receive or interfere with other WA components operating on a
different Zone.
This permits operation of up to three different zones within the same RF broadcast area.
Features
• Lossless, Uncompressed, CD quality streaming audio network, sample rate 48 kHz.
• Dedicated 2.4 GHz streaming audio network to reduce interference with WiFi networks
or other 2.4 GHz devices such as cordless phones and microwaves.
• Simple to set-up, plug and play
• Virtually no time delay or data drops
System Function
