Instruction Manual
15
Troubleshooting
No wireless connection (no blue "Linked" indication on either
the OAWA3-r or the OAW3-t)
1. Make sure both the transmitter and amplifier are operating on the same
Zone Setting. (Use "LINK" button receiver's bottom panel)
2. Make sure receiver is within the broadcast range of the transmitter.
Wireless Connection, but no sound
1. Make sure the audio source is properly connected and playing. Analog input
requires "line level" (1 Vrms max).
2. Verify Transmitter and Amplifier are operating on the same Zone Setting.
Specifications
The contents of this manual are Copyright © 2012 by Outlaw Audio, LLC, and may not be duplicated or reproduced by
any means, whether physical, electronic or otherwise without prior written consent from Outlaw Audio, LLC.
Outlaw Audio and the Outlaw Audio logo are registered trademarks of Outlaw Audio, LLC.
Specifications are those in effect at the time of printing. Outlaw Audio, LLC. reserves the right to change specifica-
tions or designs at any time without notice without obligation to modify existing units.
Troubleshooting
Wireless full CD quality sound
Robust and dedicated network for your
audio
Easy setup, get wireless music in seconds
Wireless range up to 150 ft (50m); line
of sight, 300 ft (100m)
No interference or delays
Time delay max 10ms
Works with both Mac & PC
Plug'n play - No software needed
Flexible multi-zone functionality
RF band: 2.4GHz
Dedicated proprietary protocol
USB 2.0 interface
SNR: 93dB
2 x 30 Watts/ch, 1 kHz 8
Ω
