Outdoor Furnace Guru Elite Heat 4868P, Руководство пользователя

Страница: 20 / 28

20
Maintenance
While in use
1. Periodically inspect vent and
float tube for freeness.
2. Remove ash and scrape firebox
free of build up as needed.
3. Check water level daily.
4. Check door for air tightness.
The door gasket may display
dark hard areas where leaks are
present.
5. Ensure shields and access pan-
els are in place at all times.
6. Watch for damp areas inside the
firebox. This could signify a
leak. Condensation during the
first fire or while burning un-
seasoned wood during warmer
weather may also be present.
Only burn seasoned wood and
clean out damp ashes immedi-
ately.
After use (seasonal)
1. Thoroughly clean the furnace of
any creosote and ash. This is
the easiest to do when the fur-
nace is still warm.
2. Check all parts of the furnace for
any standing moisture.
3. Coat the inside of the firebox and
flue with vegetable oil when
clean and dry.
Do not use mo-
tor oil!
4. Be sure the furnace reservoir is
to the maximum fill point.
5. Periodically circulate water dur-
ing the off-season to keep the
treatment mixed thoroughly and
lubricate pumps. Circulate for 24
hours once every other week.
6. Cap chimney or flue to prevent
moisture from entering the fire-
box.
7. If needed, thoroughly clean the
blower and flapper assembly.
Use the following procedure out-
lined on page to check for cor-
rect operation of the flapper as-
sembly.