Otto Bock 8S710, Инструкция по эксплуатации

Страница: 7 / 44

7
NOTICE
Careless use of the product
Damage to the product due to contact with pointed or sharp-edged objects
► Do not allow the product to come into contact with the aforementioned objects.
INFORMATION
The product must be cleaned and inspected for damage daily.
The sections "Area of application" and "Environmental conditions", as well as the safety informa­
tion, contain important information regarding the safe use of the product and point out how dam­
age to the product can be avoided.
The following points provide suggestions how problems that occur in daily use can be addressed:
•
Safe handling of the product
A prosthetic glove enables the use of the prosthetic hand in everyday life. Practical exercises
are required within a course of therapy to become familiar with the product, which makes it
possible to use the product safely in a wide range of situations.
• Prevention of soiling and damage
A range of activities (e.g. in the house and garden) can cause soiling or damage to the pros­
thetic glove due to unallowable environmental conditions. It is nevertheless possible to per­
form these activities by taking corresponding protective measures (e.g. putting on working or
safety gloves) and exhibiting due care and attention. Because it is not always possible to
avoid light soiling, regular and immediate cleaning is required to keep the prosthetic glove
clean. In order to reduce bleeding, strongly coloured clothing should be washed according to
the manufacturer’s recommendations before being worn for the first time. Using caution when
handling coloured pens, printers and copiers as well as printed matter (e. g. newspapers,
photocopies) is important in order to avoid pigment particles from permanently staining the
material.
4.2 Cleaning
NOTICE
Non-observance of cleaning instructions
Damage to product and permanent soiling due to use of improper cleaning agents
► Only clean the product according to the cleaning instructions provided in the instructions for
use.
NOTICE
Penetration of moisture
Loss of or limited functionality of the prosthesis
► Make sure that no water gets into the prosthesis while cleaning the prosthesis cover. The
prosthesis cover is not firmly secured to the socket, so that water can get into the prosthes­
is.
>
Materials required:
warm water, soap, cloth, lint-free cloth
1) Clean the product with warm water, soap and a cloth.
2) Rinse off soap residues with water.
3) Dry the product with a lint-free cloth and allow it to air dry fully.