Otto Bock 17KO1 Series, Инструкция по эксплуатации

Страница: 112 / 116

17.3 Directives and manufacturer’s declaration
17.3.1 Electromagnetic environment
This product is designed for operation in the following electromagnetic environments:
•
Operation in a professional healthcare facility (e.g. hospital, etc.)
• Operation in areas of home healthcare (e.g. use at home, use outdoors)
Observe the safety notices in the section "Information on proximity to certain areas" (see Page 71).
Electromagnetic emissions
Interference measure­
ments Compliance Electromagnetic environment directive
HF emissions according to
CISPR 11 Group 1/class B The product uses HF energy exclusively for its internal
functioning. Its HF emissions are therefore very low,
and interference with neighbouring electronic devices is
unlikely.
Harmonics according to
IEC 61000-3-2 Not applicable – power
below 75 W –
Voltage fluctuations/flicker
according
to
IEC 61000-3-3
Product meets the require­
ments of the standard. –
Electromagnetic interference immunity
Phenomenon EMC basic standard or
test procedure
Interference immunity test level
Electrostatic discharge IEC 61000-4-2 ± 8 kV contact
± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air,
High-frequency electro­
magnetic fields
IEC 61000-4-3 10 V/m
80 MHz to 2.7 GHz
80% AM at 1 kHz
Magnetic fields with rated
power frequencies IEC 61000-4-8 30 A/m
50 Hz or 60 Hz
Electrical fast transi­
ents/bursts
IEC 61000-4-4 ± 2 kV
100 kHz repetition rate
Surges
Line against line IEC 61000-4-5 ± 0.5 kV, ± 1 kV
Conducted interference
induced by high-frequency
fields
IEC 61000-4-6 3 V
0.15 MHz to 80 MHz
6 V in ISM and amateur frequency bands between
0.15 MHz and 80 MHz
80% AM at 1 kHz
0% U
T
; 1/2 period
At 0, 45, 90, 135, 180, 225, 270 and 315 degrees
Voltage drops IEC 61000-4-11
0% U
T
; 1 period
and
70% U
T
; 25/30 periods
Single phase: at 0 degrees
Voltage interruptions IEC 61000-4-11 0% U
T
; 250/300 periods
112
Appendices
C-Brace joint unit 17KO1=*