OTT Pluvio 2 S Скачать руководство пользователя страница 42

Страница: 42 / 56

7.6 Performing the Guided Accuracy Test (check measurement)

The “OTT Pluvio

S Software” flash drive is available as an accessory to the

OTT Pluvio

S (refer to Appendix E).

In addition to the Operating Instructions (PDF file), USB interface driver, and OTT

datalogger example configurations, this flash drive includes the OTT Pluvio

Oper-

ating Software. Alternatively, the individual files are found on our website

www.ott.com/resources for free download.
Using the OTT Pluvio

Operating Software, a Guided Accuracy Test may be per-

formed. Using this test, the OTT Pluvio

S can be easily and quickly checked for

proper operation on site.
In addition to this feature, other operations are provided by this Operating Software:

e.g. modify OTT Pluvio

S basic settings, start measurements, or update the

firmware.

Please note:

Perform the Accuracy Test on calm days without precipitation!

(Otherwise, the test will be affected by wind and unwanted precipitation.) The USB

interface also supplies operating voltage to the OTT Pluvio

S. No additional

power supply is required. However, if present, it does not have to be removed.

Preparatory work

Prerequisite: PC (notebook) running Microsoft Windows 7 or later operating system.

䡵

Log on to the PC as an administrator

䡵

Installing the OTT Pluvio

Operating Software:

– copy the file “setup.exe” into a directory of the PC;

– start the file “setupe.exe”

➝

the “InstallShield Wizard” (installation program)

opens;

– follow the installation instructions on the screen.

䡵

Installing the USB interface driver (FTDI drivers):

– copy the file “CDM v2.12.00 WHQL Certified“

into a directory of the PC;

– remove the USB interface cover and connect the OTT Pluvio

S to the PC via

the USB cable (included); refer to Fig. 21;

– complete the device driver installation wizard that is automatically started;

– start the file “CDM v2.12.00 WHQL Certified“

or higher release

USB interface

USB cable

Cover

Fig. 21: Connecting the OTT Pluvio

to the PC using the USB interface.

Once the PC supplies power to the

OTT Pluvio

S via the USB interface, a

green LED below the USB interface is lit.

Содержание Pluvio 2 S

























































Результаты поиска

Содержание Pluvio 2 S

Отзывы:

Похожие инструкции для Pluvio 2 S

Бренды по названию

Популярные бренды

OTT Pluvio 2 S, Руководство по эксплуатации

Результаты поиска

Содержание Pluvio 2 S

Отзывы:

Похожие инструкции для Pluvio 2 S

Бренды по названию

Популярные бренды