otometrics MADSEN Alpha OAE, Руководство пользователя

Страница: 54 / 68

The manufacturer reserves the right to disclaim all responsibility for the operation safety, reliability and performance of
equipment serviced or repaired by other parties.
Following repair, a qualified electronics engineer should verify the safety of all equipment.
Calibration should be performed annually by suitably qualified personnel using the appropriate equipment.
App. 1.6.1 Declaration
All devices of the type Alpha OAE should be checked and calibrated annually through a service center authorized by the
manufacturer.
App. 1.7 Manufacturer
GN Otometrics A/S
9 Hoerskaetten, DK-2630 Taastrup
Denmark
+45 45 75 55 55
+45 45 75 55 59
www.otometrics.com
App. 1.7.1 Responsibility of the manufacturer
The manufacturer is to be considered responsible for effects on safety, reliability, and performance of the equipment only
if:
• All assembly operations, extensions, re-adjustments, modifications or repairs are carried out by the equipment man-
ufacturer or personnel authorized by the manufacturer.
• The electrical installation to which the equipment is connected complies with EN/IEC requirements.
• The equipment is used in accordance with the instructions for use.
The manufacturer reserves the right to disclaim all responsibility for the operating safety, reliability and performance of
equipment serviced or repaired by other parties.
54 Otometrics - MADSEN Alpha OAE
App. 1 Standards and Safety