OTIS GenII WireFree OI-6900 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 49

OTIS GenII WireFree OI-6900 Скачать руководство пользователя страница 5

Warnings

CAUTION: THE INTERNAL COMPONENTS CAN BE STATIC SENSITIVE. USE CAUTION WHEN
OPENING THE ENCLOSURE AND HANDLING INTERNAL COMPONENTS.



Do not open the enclosure when the device is energized.



Do not open the enclosure if an explosive gas atmosphere may be present.



The Otis Instruments WireFree OI-6900 Sensor Assembly is Class I Division I, Groups C&D
Certified. The assembly is able to maintain its certification at all times while in the field,
simply by using the non-intrusive calibration method which requires the use of an Otis
Instruments, Inc. distributed magnet. However, if the Moore lid is removed, for whatever
reason, the OI-6900 certification is not valid. To avoid invalidating the certification, once the
device is put in the field, always use the Otis Instruments, Inc. distributed magnet to ensure
non-intrusive calibration.



Strong magnetic fields may interfere with the non-intrusive magnetic switches. A strong
magnetic field may momentarily active a switch, or permanently disable the switch to the “on”
or “off” position.



Do not cover the hole in the calibration cup, as this will cause the calibration to be inaccurate.

5

«
...
3
4
5
6
7
...
»

Содержание GenII WireFree OI-6900


















































Отзывы:

Нет отзывов