Outgoing calls
How to make a call
Make sure that you are able to speak into the ConnectClip microphone (A).
1. To make a call press the ConnectClip multibutton briefly (B). The hook is now off and
you will hear a dial tone in the hearing aids. The status indicator on the ConnectClip
and the phone indicator on the Phone Adapter will turn steady green.
2. Pick up the handset on your landline phone (or press “Call” on the portable phone) and
dial the phone number(C) as you normally do to make a call.
3. After a short while you will hear the call tone in your hearing aids indicating that the
call is now connected through your ConnectClip and hearing aids. .
You can now put the handset back on (or press “end call” on the portable phone).
To end the call, simply press the multibutton on the ConnectClip briefly.
Note: Make sure to put the handset correctly back on the phone - otherwise the phone line will block
for incoming calls.
Incoming calls
Make sure that you are able to speak into the ConnectClip microphone (A).
When your landline phone rings, you will hear an incoming call alert in your hearing aids.
The phone indicator on the Phone Adapter will blink green and at the same time the status
indicator on the ConnectClip will blink green (B).
Press the multibutton on the ConnectClip briefly (C) to answer the call. You will hear a short
confirmation beep in your hearing aids. The status indicator on the ConnectClip and the
phone indicator on the phone adapter will now be steady green.
To end the call, simply press the multibutton on the ConnectClip briefly and the status
indicator turns blue.
C
Making a call
ConnectClip
Status
ConnectClip
Power
Phone
Adapter
Description
ConnectClip and Phone Adapter
are connected
Press the multibutton on the ConnectClip
briefly and you will hear a dial tone in the
hearing aids
Steady
Blinking
Pairing the ConnectClip to the Phone Adapter
The very first time your ConnectClip is used with the Phone Adapter, it must be paired to
the Phone Adapter.
For Pairing:
1. Make sure the Phone Adapter is powered on, i.e. the power indicator is steady green.
2. Press the multibutton AND volume up button on the ConnectClip (B) for about 6
seconds until status indicator starts blinking blue.
3. Place the ConnectClip on top f the Phone Adapter ‑ the pairing takes around
20‑60 seconds.
4. The pairing is completed when the power indicator on the Phone Adapter and the
status indicator on the ConnectClip turns steady blue. Pairing is done only once and
will normally not have to be repeated.
B
Status
Pairing ConnectClip
ConnectClip
Status
ConnectClip
Power
Phone
Adapter
Description
ConnectClip and
Phone Adapter on
ConnectClip in
pairing mode
Pairing complete
Steady
Blinking
Power
66
67
Phone Adapter with ConnectClip
