OTC DTX-202 TIG, Руководство пользователя

Страница: 54 / 80

Operation
54
DTX-2200-3000 AC/DC
L22 FINAL welding CURRENT
2200 AC/DC 3000 AC/DC
TIG DC 5 - 220 A 5 - 300 A
TIG AC
DYNAMIC TIG
SPEED TIG
COLD TIG
SOFT TIG
5 - 220 A
5 - 220 A
16 - 127 A
16 - 156 A
5 - 300 A
5 - 300 A
5 - 173 A
5 - 212 A
WARNING: This can only be programmed when the TIG AC with HF ignition or TIG DC with HF ignition welding
processes and the 2 STROKES welding mode are used.
To exit the setting phase, hold the WELDING PARAMETERS SELECTION key (T10) down for about 1 second.
WARNING: These WELDING PARAMETERS are only to be activated by qualified personnel, or those trained by
technicians.
14.3.10 Editing the maximum and minimum limits for welding
parameters
Welding machine in STANDARD (Std) configuration:
In welding processes:
• TIG AC with HF ignition
• TIG DC with HF ignition
The DTX AC/DC makes it possible to activate modification of the MAXIMUM AND MINIMUM LIMITS for some
WELDING PARAM- ETERS thereby providing a more expert welder with a more versatile welding machine.
Proceed as follows:
1) Switch on the welding machine holding down the WELDING PARAMETERS SELECTION key (T10).
2) Press the WELDING PARAMETERS SELECTION Key (T10) a number of times to set the limits for the following
welding parameters: