B_EU_EMP_en.doc
ÖSTLING Markiersysteme GmbH
Operation manual EMP
6
1.3 Measures taken by the user/operator
Consider warning plates and references
With the operation of the marking equipment also actions are to be
implemented, from which dangers can proceed. In this manual the instructions
for implementing such actions warning references are placed in front. At the
equipment are in addition appropriate warning plates.
Note
Mind the warning references!
Mind the commands and interdictions of the warning references. They serve
your protection.
These warning references include:
•
A
symbol.
•
References to the source and kind of the danger.
•
Instructions, how you can avoid the danger.
Example:
Electrolytes are oxidizing substances!
Danger of poisoning.
¾
Do not swallow the electrolyte and do not bring it on the mucous mem-
branes or eyes.
Personnel instruction
The marking equipment may be served, waited and repaired only by authorized,
trained and instructed personnel.
Work on the electrical and pneumatic equipment may be implemented only by
particularly trained specialists.
In addition the following measures must be accomplished, before the personnel
takes up the work on the equipment:
•
Instruct over arising dangers.
•
The user must obligate, to the extent necessary, the personnel for carrying
protective clothing and gloves.
•
Competencies for operation, maintenance and repair must be clearly
specified, so that under the aspect of safety no unclear authority arises.
•
Read the technical documentation of the equipment. It is recommended to
the user to be confirmed in writing in each case that the personnel read and
understood the technical documentation.