B_EU_EMP_en.doc
ÖSTLING Markiersysteme GmbH
Operation manual EMP
27
During the pumping time the electrolyte pump runs. The pumping time begins at
the same time as the marking time.
12. Press
↓
(5) until parameter "Pump time" appears.
13. Press ENTER (6).
Arrow points at "PT = ...".
14. To increase the pumping time PT: press
↑
(4).
Each press increases the pumping time in steps of 0.1 s. The maximum
value is 10.0 s.
15. To decrease the pumping time PT: press
↓
(5).
Each press decreases the pumping time in steps of 0.1 s. The minimum
value is 0.1 s.
16. To reject the settings: press MENU (7). To assume the settings: press
ENTER (6).
Menu "Adjustment" appears.
During the retarding time no voltage is impressed, the marking is "retarded".
The retarding time begins when the foot switch is pressed.
17. Press
↓
(5) until parameter "Retarder" appears.
18. Press ENTER (6).
Arrow points at "RT = ...".
19. To increase the retarding time RT: press
↑
(4).
Each press increases the retarding time in steps of 0.1 s. The maximum
value is 10.0 s.
20. To decrease the retarding time: press
↓
(5).
Each press decreases the retarding time in steps of 0.1 s. The minimum
value is 0.1 s.
21. To reject the settings: press MENU (7). To assume the settings: press
ENTER (6).
Menu "Adjustment" appears.
Entering an electrolyte designation makes sense when all adjustments are
saved in a file (see page 31).
22. Press
↓
(5) until parameter "Electrolyte" appears.
23. Press ENTER (6).
Arrow points at the electrolyte designation or at an empty row under
"Electrolyte".
24. Leaf through number 0 - 9 and letters A - Z and a - z with
↑
(4) und
↓
(5).
Press ENTER (6) to select a number or letter.
The cursor jumps one digit to the right.
25. Repeat step 24 until the electrolyte designation is entered (max. 5 digits).
Setting the
pumping time
Setting the
retarding time
Enter the
electrolyte