B_EU_EMP_en.doc
ÖSTLING Markiersysteme GmbH
Operation manual EMP
5
1.2 Operational safety
The marking equipment is built according to the state of the art and reliable in
service.
From this marking equipment however dangers can proceed, if it is used by not
trained personnel inappropriately or to not intended use. Therefore threatens:
•
Dangers for the safety of the operator.
•
Impairment of the marking equipment and further real values of the user.
•
Impairment of the efficient work of the equipment.
Intended use of the marking equipment
The EMP/MODULMAT is an electrolytic marking system for marking products
with electrically leading surface.
Intended use means in addition:
•
The installation of the marking equipment and its operation must stand in
conformity with the valid national regulations of the user country. For their
observance the user is responsible.
Impermissible is:
•
Arbitrary changing or changes of the marking equipment by the user or
operator.
•
Each function, which could impair safety.
It is possible to interconnect the parts of the equipment so that a short-circuit is
manufactured. This is e.g. the case, if the marking head contacts the baseplate
during the marking or if the positive cable is connected directly with the negative
cable. Such functions are generally inadmissible!
Danger of a short-circuit!
High current flow. Safety device is destroyed.
¾
The marking head may not come into contact with the baseplate.
No liability with not intended use!
Each use going beyond that is not considered as intended. For material
damage and personal injuries resulting from this the manufacturer is not
responsible; the risk for this carries alone the user.