OSTBERG HERU LP, Инструкции по сборке/установке

Страница: 46 / 80

46
OPERATING THE CONTROL UNIT
Std
SYSTEM OK
...
Std Std
SYSTEM SYSTEM OK OK
... ...
To activate or disable
the keylock;
press down the key
for 3 seconds.
VIEW MODE 1 shows alarm and VIEW MODE 2 shows what kind of alarm.
Information of the units current status such as temperature, fan speed, the rotor temperature efficiency when
operating, heat respectively cooling needs is shown in the
VIEW MODE 1, 2, 3 and 4 . These menus is normally
not lit up for battery-saving purposes but is lit up after the first press of the button and is switched off after
about 2 minutes of not being in use.
The control unit automatically returns to
VIEW MODE 1 after one minute when one has viewed other submenus.
NB! At new setting a delay of 15 seconds should be taken into consideration.
Bottom row
shows the possible
choices with key
or .
E.g turn on/off
the unit with the
key.
Top row
and
middle field
displays
current
values
and
activities.
1270411_utg4_HERU_LP_SV_EN.indd 46 2019-03-04 08:15:50
1270411_utg4_HERU_LP_SV_EN.pdf 46 2019-03-04 08:20:46