57
<20180425>
How to set a static IP Address (temporary
or permanent)
Use BOSS to set a temporary IP Address or Disable DHCP
via the web interface, then assign IP Address
Talon web interface is slow when encoding 1) If more than one encoder is running, try to offload
some of the video encoding to the server by sending one
stream to the server and letting the server transmux the
stream to other resolutions and formats.
2) Decrease the resolution of one or more of the streams
that are encoding. Keep in mind the total capability of
the Osprey talon is equivalent to one 1080P 60 stream
Closed Captions are not being displayed in
Flash Player on webpage
1) Ensure that the Flash player being used supports
closed captions and is configured for them.
2) Ensure that the rtmp server being used supports and
is configured for embedded closed captions
3) Ensure that you are not using an HDMI source as
HDMI does not support closed captions.
When configuring a UDP encoder, error
message “Ts rate too small to carry
elementary streams” is displayed
Increase the TS RATE located under Output Setup in the
encoder. This should be approximately 1.25 times the
Video Bitrate that is configured.
Video appears jerky or pixelated in stream Increase the video bitrate or decrease the video
resolution in the encoder configuration
Audio is not present in stream
1) Verify that the correct audio source is selected in the
encoder configuration
2) If SDI audio was previously selected as an audio
source you will need to change the configuration to the
correct audio source and reboot the Talon before audio
will be available.
Error message “ERROR: invalid or
corrupted firmware image! “when
updating the firmware.
Make sure you are trying to update with the correct
image. The most common cause is trying to apply a
decoder image to an encoder or encoder image to a
decoder
Содержание Talon G1H model AH-E23
Страница 1: ...Osprey TALON User Guide...
Страница 3: ...Osprey Talon User Guide 2 20180425...