Osprey Talon User Guide
8
<20180425>
Osprey BOSS With an Invalid Static IP
You might find that you have configured Talon for a static IP on one network and then moved it to a network where that
address is invalid. Simply connect Talon to the current network. Then start Osprey BOSS on a PC on that network. BOSS will
identify the address of the Talon even though it will not be able to connect with the web GUI. Similar to the scenario above, use
BOSS to change the invalid static IP to one that is valid on the current network. Then access the web GUI and complete the
updating of the address on Talon.
Unknown IP Address Without Osprey BOSS
In this scenario, Talon is installed on a network and already has an IP address. You find yourself without access to Osprey BOSS.
With Talon powered up and attached to the network, insert a thumb drive in the USB port of Talon. The thumb drive needs to
be formatted with either FAT or FAT32. After about minute remove the thumb drive and insert it in another computer. On the
drive, there will be a file called “TalonIP.txt” that will contain the IP address and MAC address of your Talon. You can then use
the IP address to connect via a modern browser. Any time you insert a thumb drive into Talon a “TalonIP.txt” file will be
created.
IMPORTANT NOTE:
Talon is only compatible with IPv4 addresses. Never connect an Osprey Talon system to the Internet through a direct
connection. We recommend taking precautions against unwanted access such as installing systems behind a router or firewall. The speed of the
router or switch should match or exceed the speed of the system’s network card. See your network administrator for recommendations.
Osprey Talon Product Identification
Talon G1H H.264 Encoder
G1H supports HDMI and CVBS inputs
and has a single front panel button for
one-touch encoder control. It has the
same encoding capacity as the G1 and
G2.
Talon G1 H.264 Encoder
SDI, HDMI, CVBS, Analog Audio Inputs
3 Configuration Modes
Closed Caption Support
Simultaneous Streaming and Archiving
Talon G2 H.264 Encoder
All the features of the G1, plus an external touch display
providing IP Information, Stop/Start control and Encoder
Status.
Содержание Talon G1H model AH-E23
Страница 1: ...Osprey TALON User Guide...
Страница 3: ...Osprey Talon User Guide 2 20180425...