Osprey Talon User Guide
51
<20180425>
Clear Configuration
When this check box is selected, Talon will remove all encoder configurations from memory. You will not be able to recover
them.
Clear System
When this check box is selected, Talon will clear the encoder name and IP address from memory. Selecting both “Clear
Configuration” and “Clear System” will clear all settings and restore Talon to its factory state.
Usually a Talon on the network receives its IP address via DHCP. It is possible to assign a static address. Occasionally, when a
static address is used an error can occur whereby the address doesn’t match the correct specification for that network. When
the address is wrong, it is not possible to access the Web GUI of the Talon. BOSS is still able to locate and identify a Talon with
an unreachable IP address, but will be unable to connect to the Web GUI. For that reason, BOSS includes a utility to assign a
temporary
address to allow access to the Web GUI.
To use this utility:
Click on the icon to the left of the Talon you need to change.
Select “Set IP” from the dialog box
In the “Set Device IP Address” dialog, enter valid IP information.
Press “Locate Devices” to refresh BOSS
Access Talon by clicking on the name of the Talon you want to reach
IMPORTANT NOTE:
The IP address that BOSS assigns is only for accessing the web GUI. Upon successfully reaching the GUI, use
the Talon’s IP configuration to set it to DHCP or manually enter a valid IP address. If you reboot Talon without first resetting its
address in the web GUI you will return to the situation where you started. You will once again have a Talon with an unreachable
IP address.
Troubleshooting Note
: BOSS will not locate Talon if:
Network Discovery is turned off on your Windows PC
Your Talon is not in the same network segment (VLAN/subnet) as your PC
Your network is firewall-protected. The UDP broadcast may not be permitted unless Port 10024 is open.
If you are unable to locate Talon, have your network administrator ensure it is on the same physical and logical section of
your network and that broadcast traffic is allowed on port 10024 with a broadcast address of 224.0.0.212
Содержание Talon G1H model AH-E23
Страница 1: ...Osprey TALON User Guide...
Страница 3: ...Osprey Talon User Guide 2 20180425...