Oshkosh Corporation JLG R2632, Руководство по эксплуатации и безопасности

Страница: 42 / 108

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-10
31215932
Emergency Stop Switch
NOTE: Both ground and platform emergency stop switches must be set
to ON in order to operate the machine.
When power is directed to the platform from the ground control sta -
tion, the platform emergency stop switch is turned on by pulling the
switch out (on) and is turned off by pushing the switch in (off). The
red two-position emergency stop switch functions to provide power
to the platform control station and also to turn off power to machine
functions in the event of an emergency.
NOTICE
ALWAYS POSITION EMERGENCY STOP SWITCH TO "OFF" POSITION (PUSHED IN) WHEN
MACHINE IS NOT IN USE.
Lift/Drive Selector Switch
NOTE: When selecting between the Lift and Drive functions the joystick
control must be returned to the neutral position for approxi -
mately 1/2 second before the function change is operable.
This toggle switch is used to select operation of either the drive or lift
function. After selecting a function, the joystick controller must be
used to activate that function. Only change the function selected,
with the joystick in the neutral position. Otherwise, the function
selected will not change until the joystick is returned to the neutral
position.
Forward/Reverse/Lift/Lower Directional
Arrow
This decal indicates the proper direction to
mount the platform control box, with the black
arrow pointing to the front of the machine. The
black/white arrow also indicates the direction to
move the joystick control per the lift/drive selec -
tor switch decal for the lift and the drive select
functions.