Oshkosh Corporation JLG R2632, Руководство по эксплуатации и безопасности

Страница: 33 / 108

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31215932
3-1
SECTION 3. MACHINE CONTROLS, INDICATORS, AND OPERATION
3.1 GENERAL
NOTICE
THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE APPLICATION AND OPER -
ATION. THE USER AND OPERATOR ARE RESPONSIBLE FOR CONFORMING WITH GOOD
SAFETY PRACTICES.
This section provides the necessary information needed to under -
stand the machine’s controls and their functions.
DO NOT RAISE PLATFORM UNLESS THE MACHINE IS ON A SMOOTH, FIRM SURFACE,
WITHIN THE LIMITS OF THE MAXIMUM OPERATING SLOPE, FREE OF OBSTRUCTIONS
AND HOLES.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
IF THE PLATFORM DOES NOT STOP WHEN A CONTROL SWITCH OR LEVER IS RELEASED,
USE THE EMERGENCY STOP SWITCH TO STOP THE MACHINE.
3.2 DESCRIPTION
This machine is a Mobile Elevating Work Platform (MEWP) used to
position personnel, along with their necessary tools and materials at
work locations.
This MEWP has a primary operator control station in the platform.
From this control station, the operator can drive and steer the
machine in both forward and reverse directions, and raise and lower
the platform.
The machine can be driven on a smooth, firm surface within the lim
-
its of the maximum operating slope from an elevated platform posi -
tion. Refer to the subsection Steering and Traveling of this manual for
specific requirements.
The machine also has a ground control station that can override the
platform control station. Ground controls operate lift up and down
functions only. Except for performing inspections and function
checks, ground controls are to be used only in an emergency to lower
the platform to the ground should the operator in the platform be
unable to do so.