SECTION 6 - OPERATION SPECIFICATIONS AND MAINTENANCE
31217186
6-21
DTC
Help Message
Alarm
Flash
Code
Action
Trigger
001
EVERYTHING OK
None
None
· No Motion restrictions
•
Platform Mode and no Faults are active.
002
GROUND MODE OK
None
None
· No Motion restrictions
•
Ground Mode and no Faults are active.
003
ALARM SOUNDING – TILTED & ABOVE ELE
-
VATION
PF: Continuous None
· No Motion restrictions
•
Platform is elevated and chassis is not level
004
DRIVING AT CUTBACK – ABOVE ELEVATION None
None
· DriveState = CREEP
•
Platform is elevated and the machine is in the drive mode of operation
005
DRIVE & LIFT UP PREVENTED TILTED & ELE
-
VATED
PF: Continuous None
• DriveState = PREVENTED
• LiftUpState = PREVENTED
•
Driving and lift up are not possible since the platform is elevated and the
chassis is not level.
006
LIFT UP PREVENTED – MAX HEIGHT ZONE A None
None
• LiftUpState = PREVENTED
•
The vehicle has reached the maximum height allowed by the Indoor/Out
-
door selection and further lift up motion is not possible.
007
DRIVING AT CUTBACK – POTHOLE STILL
ENGAGED
None
None
• DriveState = CREEP
•
While stowed, drive speed is reduced (due to lower ground clearance) since
the control system detected that the pot-hole protection mechanism is
deployed (failed to retract).
•
Clear the obstacle blocking the pot-hole protection mechanism, repair the
mechanical problem, re-adjust the pot-hole limit switches, or repair the
wiring to correct the problem.
•
Alternately, there may be difficulty with the Elevation Angle Sensor that
causes the Control System to improperly believe the platform is stowed.
008
FUNCTIONS LOCKED OUT – SYSTEM POW
-
ERED DOWN
None
None
• Enter SafeMode
• LiftDownState = PREVENTED
•
A period of time elapsed without activity and the Control System entered a
low-power state to preserve battery charge (2 hours). Cycle the Ground
EMS in GroundMode or the Platform EMS in PlatformMode to re-enable
the vehicle.
•
Two hours without Drive Forward, Drive Reverse, Lift Up, Lift Down, Steer
Left, or Steer Right.
•
Timer resets if user changes PlatformMode/GroundMode
Содержание JLG ES1330L
