Oshkosh Corporation JLG ES1330L, Руководство по эксплуатации и безопасности

Страница: 34 / 98

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-2
31217186
3.3 OPERATING CHARACTERISTICS AND LIMITATIONS
Placards
Important points to remember during operation are provided at the
control stations by DANGER, WARNING, CAUTION, NOTICE, and
INSTRUCTION placards. This information is placed at various locations
for the express purpose of alerting personnel of potential hazards con -
stituted by the operating characteristics and limitations of the
machine. See foreword for definitions of placard safety signal words.
Capacities
Raising platform above horizontal with or without any load in the plat -
form is based on the following criteria:
1. Machine is positioned on a smooth, firm surface within the
limits of the maximum operating slope.
2.
Load is within manufacturer’s rated capacity.
3.
All machine systems are functioning properly.
Stability
This machine, as originally manufactured by JLG and operated within
its rated capacity on a smooth firm surface within the limits of the max -
imum operating slope, provides a stable aerial platform for all platform
positions.
3.4 PLATFORM LOADING
The platform maximum rated load capacity is shown on a placard
located on the platform billboard and ground control station and is
based upon the machine positioned on a smooth, firm surface within
the limits of the maximum operating slope. Refer to Section 6 for the
maximum platform capacity.
The platform is entered through an entry gate at the rear of the plat
-
form. Keep gate closed at all times except when entering/exiting the
platform and loading/unloading materials.
NOTE: It is important to remember that the load should be evenly dis -
tributed on the platform. The load should be placed near the
center of the platform when possible.