Oshkosh Corporation JLG ES1330L, Руководство по эксплуатации и безопасности

Страница: 38 / 98

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-6
31217186
Ground/Platform/OFF Key Selector Switch
The key selector switch on the
Ground Control Station directs
electrical power to the desired
control station. With the switch
turned to the ground position (
1
),
power is supplied to the controls
at the ground control station.
When the switch is turned to the
platform position (
2
), power is
supplied to the controls at the
platform control station. Set the
switch to OFF position ( 3 ) when
not using machine or parking the machine overnight.
Platform Lift/Lower Switch
A three-position momentary contact switch con -
trols raising and lowering of the platform from
the Ground Control Station.
NOTE:
There will be a brief delay between switch
activation and movement of the plat -
form.
When operating platform from the ground con -
trols, activate the lift/lower switch to up position and hold to raise plat -
form, or down position and hold to lower an elevated platform. Release
to stop all movement.
Ground Emergency Stop Switch
A red two-position emergency stop switch when posi -
tioned to ON with the key selector switch positioned
to ground furnishes operating power to the ground
control station key switch. In addition, the switch can
be used to turn off power to the function controls in
the event of an emergency. Turn on power by pulling
out the switch. Turn off power by depressing switch.
Hourmeter
The Hourmeter indicates the number of hours the
machine has been operated.
Overload Indicator (LSS)
The Overload Indicator indicates when the platform
has been overloaded. An audible alarm will also signal
when the platform is overloaded.
NOTE: If the Overload Indicator is illuminated, further
elevation will be prevented. Reduce the weight
in the platform to not exceed the rated workload indicated on
the capacity decal, then the controls will work again.
1
2
3