Oshkosh Corporation JLG ES1330L, Руководство по эксплуатации и безопасности

Страница: 86 / 98

SECTION 6 - OPERATION SPECIFICATIONS AND MAINTENANCE
6-20
31217186
6.7 DIAGNOSTIC TROUBLE CODES (DTC)
IMPORTANT
THE CODES LISTED IN THE FOLLOWING TABLE IS NOT A COMPLETE LISTING OF
MACHINE DTC. THIS LISTING SHOWS ONLY THOSE THAT AN OPERATOR MAY BE ABLE
TO CORRECT DUE TO OPERATING ERROR.
The DTC table following is sorted in groups by the first two digits. These
digits represent the number of flashes the system distress indicator
lamp will flash on the platform indicator panel when a fault occurs.
The more detailed three to five digit code numbers in the DTC column
of the following tables are only indicated on a JLG handheld diagnostic
analyzer connected to the machine, or on the Ground Control Station
MDI, if equipped.
To troubleshoot multiple DTCs, start with the DTC with the higher first
two digits.
If a correction is made during a check, conclude the check by recy -
cling machine power by using the emergency stop switch.
SHOULD A FAULT OCCUR THAT CANNOT BE CORRECTED BY THE OPERATOR, THE PROB -
LEM MUST BE REFERRED TO A MECHANIC QUALIFIED TO REPAIR THIS MODEL OF JLG
LIFT.