Oshkosh Corporation JLG ES1330L, Руководство по эксплуатации и безопасности

Страница: 33 / 98

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31217186
3-1
SECTION 3. MACHINE CONTROLS, INDICATORS, AND OPERATION
3.1 GENERAL
NOTICE
THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE APPLICATION AND
OPERATION, THE USER AND OPERATOR ARE RESPONSIBLE FOR CONFORMING WITH
GOOD SAFETY PRACTICES.
This section provides the necessary information needed to understand
controls and their functions.
DO NOT RAISE PLATFORM UNLESS THE MACHINE IS ON A SMOOTH, FIRM SURFACE,
WITHIN THE LIMITS OF THE MAXIMUM OPERATING SLOPE, FREE OF OBSTRUCTIONS
AND HOLES.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
IF THE PLATFORM DOES NOT STOP WHEN A CONTROL SWITCH OR LEVER IS RELEASED,
USE THE EMERGENCY STOP SWITCH TO STOP THE MACHINE.
3.2 DESCRIPTION
This machine is a Mobile Elevating Work Platform (MEWP) used to posi -
tion personnel along with their necessary tools and materials at work
locations.
This MEWP has a primary operator control station in the platform. From
this control station, the operator can drive and steer the machine in
both forward and reverse directions, and raise and lower the platform.
The machine can be driven on a smooth, firm surface within the limits
of the maximum operating slope from an elevated platform position.
Refer to the subsection Steering and Traveling of this manual for spe -
cific requirements.
The machine also has a ground control station that can override the
platform control station. Ground controls operate lift up and down.
Except for performing inspections and function checks, the ground
controls are to be used only in an emergency to lower the platform to
the ground should the operator in the platform be unable to do so.