Oshkosh Corporation JLG ES1330L, Руководство по эксплуатации и безопасности

Страница: 14 / 98

SECTION 1 - SAFETY PRECAUTIONS
1-4
31217186
Trip and Fall Hazards
• Prior to operation, ensure all gates and rails are fastened and
secured in their proper position.
• JLG Industries, Inc. recommends all personnel in the platform wear
a full body harness with a lanyard attached to an authorized lan -
yard anchorage point while operating this machine. For further
information regarding fall protection requirements on JLG prod -
ucts, contact JLG Industries, Inc.
• Identify the designated lanyard anchorage point(s) at the platform
and securely attach the lanyard. Attach only one (1) lanyard per
lanyard anchorage point.
• Enter and exit only through gate area. Use extreme caution when
entering or leaving platform. Ensure that the platform assembly is
fully lowered. Face the platform when entering or leaving the plat -
form. Always maintain “three point contact” with the machine,
using two hands and one foot or two feet and one hand at all
times during entry and exit.
.
• Keep both feet firmly positioned on the platform floor at all times.
Never position ladders, boxes, steps, planks, or similar items on
unit to provide additional reach for any purpose.
• Never use the scissor arm assembly to gain access to or leave the
platform.
•
Keep oil, mud, and slippery substances cleaned from footwear and
the platform floor.