SECTION 4 - MACHINE OPERATION
4-22
31215036
4.11 TIE DOWN AND LIFTING
When transporting machine, boom must be in the stowed mode
with turntable lock pin engaged and machine securely tied down
to truck or trailer deck. Four tie down eyes are provided in the
frame slab, one at each corner of the machine. (See Figure 4-3.
Machine Tie Down.)
If it becomes necessary to lift the machine using an overhead or
mobile crane, it is very important that the lifting devices are
attached only to the designated lifting eyes, and that the turnta
-
ble lock pin is engaged. (See Figure 4-4. Lifting Chart.)
NOTE:
Lifting eyes are provided at the rear in the frame slab and at the
top of the turntable near the boom pivot. Each of the four chains
or slings used for lifting machine must be adjusted individually
so machine remains level when elevated.
SECURE TURNTABLE WITH TURNTABLE LOCK BEFORE TRAVELING LONG DISTANCES
OR HAULING MACHINE ON TRUCK/TRAILER.
To
order go
to
Discount-Equipment.com
