SECTION 3 - MACHINE CONTROLS AND INDICATORS
31215036
3-5
5.
Platform Rotate
Provides rotation of the platform.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANT TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
6.
Platform Leveling Override
A three position switch allows the
operator to adjust the platform level
-
ing system. This switch is used to
adjust platform level in situations
such as ascending/descending a
grade.
NOTE:
When Power/Emergency Stop switch is in the On position and
engine is not running, an alarm will sound, indicating Ignition is
On.
WHEN THE MACHINE IS SHUT DOWN THE MASTER/EMERGENCY STOP SWITCH MUST
BE POSITIONED TO THE OFF POSITION TO PREVENT DRAINING THE BATTERY.
7.
Power/Emergency Stop Switch
A two-position red mushroom shaped switch
supplies power to Platform/Ground Select
switch when pulled out (On). When pushed in
(Off), power is shut off to the Platform/Ground Select switch.
NOTE:
When the Platform/Ground Select Switch is in the
center position, power is shut off to the controls at
both operating consoles.
8.
Platform/Ground Select Switch
The three position, key operated switch sup
-
plies power to the platform control console
when positioned to Platform. With the switch
key turned to the Ground position only
ground controls are operable.
To
order
go
to
Discount-Equipment.com
