SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
31215036
2-9
Walk-Around Inspection
Begin the Walk-Around Inspection at Item 1, as noted on the dia
-
gram. Continue checking each item in sequence for the condi
-
tions listed in the following checklist.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS OFF. DO NOT OPERATE
MACHINE UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.
DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING THIS
AREA MAY RESULT IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE EXTENSIVE
MACHINE DAMAGE.
INSPECTION NOTE
: On all components, make sure there are no
loose or missing parts, that they are securely fastened, and no visible
damage, leaks or excessive wear exists in addition to any other crite
-
ria mentioned.
1. Platform Assembly
and Gate
- Footswitch works properly,
not modified, disabled or blocked. Gate latches and hinges
in working condition.
2. Platform Control Console
- Switches and levers return to
neutral when activated and released, decals/placards secure
and legible, control markings legible.
3. SkyGuard
- See Inspection Note.
4. Platform Rotator
- See Inspection Note.
5. Jib Assembly
- See Inspection Note.
6. All Hydraulic Cylinders
- No visible damage; pivot pins and
hydraulic hoses undamaged, not leaking.
7. Boom Sections
- See Inspection Note.
8. Battery
- Batteries have proper electrolyte level; cables
tight; see Inspection Note.
9. Tracks, Bottom Rollers, Idler, Track Carrier Roller, Both
Sides
- Properly secured plates, no loose or missing track
bolts, no dislocation of the track pins. Proper tension. See
Inspection Note.
10. Final Drive, Both Sides
- See Inspection Note.
11. Hood Assemblies
- See Inspection Note.
12. Turntable Lock
- Operable.
13. Auxiliary Power Pump
- See Inspection Note.
14. Air Shutoff Valve (ASOV) (If Equipped)
- See Inspection
Note.
15. Hydraulic Pump
- See Inspection Note.
16. Counterweight
- See Inspection Note.
To
order go
to
Discount-Equipment.com
