Operating Instructions Sauna exclusiv 9kW Page: 3
Operational controls on the control panel:
LCD-display
ON/OFF button
Counter Timer
Ventilator button
Cabin lighting button
Temperature selection
Adjusting buttons
Setting time
button
Setting switch timer
LCD-Display
16:10
If the control is switched off, then only the current time is displayed.
Power failure
16:10
If the power supply has been interrupted, this is indicated on the
display. The display will disappear on pressing any button.
22:35h
Start in:
16:10
The counter timer has been activated. Referring to the current time
the remaining time up to finally switching on the equipment is
displayed.
2:35h
Sauna time
16:45
82,3°C
The sauna control is in operation. Time, temperature in the cabin and
the remaining operational time are displayed.
Sensor defect
18:32
The temperature sensor in the sauna cabin is defect or the line to the
temperature sensor has been interrupted or short-circuited. After the
error has been handled this message may be deleted by pressing any
button.
Temp. fuse
12:55
144,8°C
The temperature in the sauna cabin has exceeded 139°C. This could
have triggered the temperature safety fuse in the sensor casing. After
the cabin has been cooled down this message may be deleted by
pressing any button.
Unit overheated
21:03
98,3°C
The temperature in the power component casing is too high. After
cooling down the control, this message may be deleted by pressing
any button.
ON/OFF button
By using the button the sauna may manually be switched on and –off.
Attention! By this the control is not discharged with tension! If the sauna is
switched on this button is on.
