19
REAR WHEEL REMOVAL AND INSTALLATION:
1. Ensure power is switched off.
2. Lift the bike onto a block or stand
so the wheels are off the ground.
3. Remove the chain-guard by
removing the 4 bolts securing it.
4. Release the band brake cable by
undoing the cable pinch bolt (a).
5. Remove the band brake securing
bolt.
6. Loosen the axle bolts.
7. Loosen the chain adjustment
nuts to the point where the wheel
can be pushed forward, and the
chain slipped off to the right of the
sprockets.
8. Pull back on the wheel to remove
it.
To re-install the wheel reverse the
above procedures. Ensure the
chain is correctly adjusted, the
wheel is aligned, and all nuts and
bolts are tight. When everything
else is tight, re-attach the rear band
brake cable pinch bolt such that the
brake is adjusted correctly. Minor
adjustments can be made at the
brake lever.
