13
UNPACKING AND ASSEMBLY:
WARNING!
Failure to properly assemble and adjust your bike prior to use may result in an
accident resulting in death, serious injury and/or property damage. If you are
uncertain about any aspect of the assembly and adjustment of your bike, seek
help from a qualified mechanic or the OSET Customer Service Department.
WARNING!
There are no user serviceable elements incorporated into the motor, motor
controller, batteries, battery charger, throttle, or wiring harness of your OSET
electric bike. DO NOT ATTEMPT TO DISASSEMBLE OR ADJUST ANY OF
THESE COMPONENTS. Doing so may cause extensive damage to these
components, will void your warranty, and may cause a hazardous condition. If
you cannot resolve a problem using this owners manual, contact your OSET
authorized dealer, or call the OSET Customer Service Department for
assistance.
NOTE!
If you purchased your OSET
at a local retailer your machine may be fully
adjusted and ready to ride. If you purchased your OSET in the carton, please
carefully follow the instructions below and any supplemental instructions to finish
the assembly and adjustment of your OSET.
1 Remove your
OSET
from the box.
2 Lower kickstand and place your OSET on a solid & level surface.
3 Remove all the packing materials.
4 Using the supplied allen wrench, make sure the steering stem is in the forward
facing position and tighten the top and side bolts securely and evenly. Secure the
handlebars tightly in the steering stem. Double check tightness and alignment.
Adjust the brake lever positions to suit the rider.
5 Check tire pressure of both tires and confirm they are properly inflated to
30-40 psi.
6 Unpack charger from its box and charge the batteries while thoroughly reading
the complete owners manual. (See the Charging Instructions on pages 23).
7 Compress each brake lever in turn. The lever should not compress completely
to the bar Each individual brake should hold the bike securely when you push the
OSET against the brake. If your brake needs adjustment, follow the instructions
on page 20. For beginning riders adjust the front brake so it will not lock the
wheel easily. Learning riders should be aware which lever operates which brake.
8. For maximum battery life, always fully charge before operating your OSET for
the first time. (See page 23 for charging instructions).
9. While your batteries are charging,
please Read Your Owners Manual
completely.
Now your OSET is fully assembled, adjusted and checked. Once the
batteries are fully charged, your OSET will be ready to ride safely.
