18
-
Check the tires for proper inflation. Also, inspect the tires for
damage.
CLEANING:
Cleaning and maintaining your OSET correctly will provide a more enjoyable
ownership and riding experience. By hand cleaning the bike, you can
simultaneously inspect all of the components. We recommend cleaning be done
with a damp cloth.
Never use a hose and never pour water onto the bike. A
hose or power washer may cause irreparable damage to sensitive
components.
WARNING!
Water and electrical components do not mix! Do not get water onto the controller,
throttle or wiring. Failure to follow this instruction could result in permanent
damage, and could cause erratic machine behavior, leading to possible injury or
death.
FRONT WHEEL REMOVAL AND INSTALLATION:
-
Ensure power is switched off.
-
Lift the bike onto a block or stand so the wheels are off the ground.
-
On OSET 12.5, disconnect the V-Brake cable by squeezing the two
sides together and release the cable end from the mount.
-
Loosen the axle bolts and lower the wheel away from the front
forks.
-
To re-install the wheel, reverse the above procedure and ensure
the wheel is aligned correctly and the axle bolts are tight. Spin the
wheel to ensure it is centered and spins freely.
