Dongguan Ortur Intelligent Technologies Co., Ltd.
www.ortur3d.com www.ortur3dprinter.com
No.27, Second Industrial Park, Heshi Road, Qiaotou Town, Dongguan 523527, Guandong Province, China
12
3.4.1 “Preheat PLA” Command:
In the “Preheat PLA” Menu, the First Option is “Preheat PLA” Command. You could press this command, and
it would preheat both of Nozzle and Hotbed to the target temp for PLA filament.
PS. You could set up the Target Temperatures & Fan Speed in advance at {Configuration => Preheat PLA
Configuration}.
3.4.2 “Preheat PLA End” Command:
In the “Preheat PLA” Menu, the First Option is “Preheat PLA End” Command. Press this command, it would
only preheat the Nozzle to the target temp for PLA filament.
3.4.3 “Preheat PLA Bed” Command:
In the “Preheat PLA” Menu, the First Option is “Preheat PLA Bed” Command. Press this command, it would
only preheat the Hotbed to the target temp for PLA filament.
