Dongguan Ortur Intelligent Technologies Co., Ltd.
www.ortur3d.com www.ortur3dprinter.com
No.27, Second Industrial Park, Heshi Road, Qiaotou Town, Dongguan 523527, Guandong Province, China
4
In the “Print from SD” Menu, you would find the Gcode files, you had saved in the SD card. Please turn
clockwise or anticlockwise the Control Button to choose the Gcode file, you’d like to print. And then, press
the Control Button to start the print.
PS, Before the printing, please make sure you have leveled the X Axis and Hotbed. Otherwise, the printer
may be damaged !
2. “Motion” Menu:
In the Main Menu, the Second Submenu is “Motion”, You could press the Control Button to go to this menu.
2.1 “Move axis” Menu:
In the “Motion” Menu, the First Option is the “Move axis” Menu, You could press the Control Button to go to
this menu.
2.1.1 “Soft Endstops” Option:
In the “Move axis” Menu, the First Option is “Soft Endstops” Option, You could press the Control Button to
turn on tor turn off the “Soft Endstops” Function.
PS. When “Soft Endstops” turn on, the motors wouldn’t move the axes to the negative coordinate value.
So, if XYZ End stops are bad, this Command would protect the printer, wouldn’t let the XYZ motors keep
driving the XYZ axes and damaging the printer.
