Dongguan Ortur Intelligent Technologies Co., Ltd.
www.ortur3d.com www.ortur3dprinter.com
No.27, Second Industrial Park, Heshi Road, Qiaotou Town, Dongguan 523527, Guandong Province, China
27
And turn clockwise or anticlockwise the Control Button to adjust the Z Value a little bit.
9. “Configuration” Menu:
In the Main Menu, the Fourth Option is “Configuration” Menu. You could press the Control Button to go to
this menu.
It’s same as { 4. “Configuration” Menu }.
10. “Change filament” Command:
In the Main Menu, the Fifth Option is “Change filament” Command. You could press the Control Button to
change the old filament to the new filament.
It’s same Operation as { 3.4.1 “Preheat PLA” Command }.
