Dongguan Ortur Intelligent Technologies Co., Ltd.
www.ortur3d.com www.ortur3dprinter.com
No.27, Second Industrial Park, Heshi Road, Qiaotou Town, Dongguan 523527, Guandong Province, China
16
4.1.9 “Initialize EEPROM” Menu:
In the “Advanced Settings” Menu, the Ninth Option is “Initialize EEPROM” Menu.
You could press the Control Button to go to “Initialize EEPROM” Menu. And there is a “Initialize EEPROM”
Command. This command would let the printer clean your own setting and get back to the default factory
settings.
When the “Initialize EEPROM” Command executed, all the manual setting would be cleaned, and you need
to press the “Reset” Button, and redo the manual setting (For example, the Bed Leveling again.
4.2 “Runout Sensor” Option:
In the “Configuration” Menu, the Second Option is “Runout Sensor” Option. You could press the Control
Button to turn on or turn off the Filament Run-out Detection Function.
4.3 “Outage Recovery” Option:
