manualshive.com logo in svg

Orthman 125-087-02-EN-OM, Руководство оператора

Поделиться
Скачать
Orthman 125-087-02-EN-OM Скачать руководство пользователя страница 12

SAFETY INFORMATION

DR12x2 Row Hopper Planter OM-EN 

2-4

Safety Alert Symbol

When you see this symbol, carefully read the message(s) 
that follow. Follow all recommended precautions and safe 
operating practices in this manual.

Hazard control and accident prevention are dependent 
upon the safety awareness and proper training of 
personnel involved in the operation of this implement.

Be Aware of Signal Words

Signal words designate a degree or level of hazard 
seriousness. These signal words include:

DANGER

!

DANGER

 indicates a hazardous situation that, if not 

avoided, will result in death or serious injury. 

DANGER

 

is limited to extreme situations, typically for machine 
components which for functional purposes cannot be 
guarded.

WARNING

!

WARNING

 indicates a potentially hazardous situation 

that, if not avoided, could result in death or serious 
injury. 

WARNING

 includes hazards that are exposed 

when safety guards are removed. 

WARNING

 may also 

be used to alert against unsafe practices.

CAUTION

!

CAUTION

 indicates a potentially hazardous situation 

that, if not avoided, may result in minor or moderate 
injury. 

CAUTION

 may also be used to alert against 

unsafe practices.

Shutdown and Storage

DANGER

!

Avoid crushing. Failure to follow this information will 
result in death or serious injury. Make sure all personnel 
are clear of the implement before lowering.

Lower the implement to the ground, place the tractor in 
park, turn off the engine, and remove the key.

DANGER

!

Avoid crushing. Failure to follow this information will 
result in death or serious injury. Use bar stands and 
cylinder stops to support the implement. 

Store the implement on a clean, dry, and level surface. 
An uneven surface could cause the implement to shift or 
fall, resulting in injury or death as well as implement 
damage. Securely support all implement components 
that must be raised. Store the implement away from 
human activity.

For Your Protection

CAUTION

!

Read and understand the entire contents of this manual 
before operating or servicing the implement.

Read and understand all operator manuals for the 
machinery used in conjunction with the DR12x2 Row 
Hopper Planter.

Carefully read all safety decals in this manual as well as 
on the implement. Keep the implement clean so decals 
are easily visible. Keep all safety decals in good, clean, 
and legible condition. Immediately replace damaged 
and/or missing decals. Replacement decals are available 
from your Orthman dealer.

Learn to operate the implement and all components 
properly. Do not let others operate the implement without 
proper instruction. Unauthorized implement modifications 
may impair function and safety. If you do not understand 
any content in this manual or need assistance, contact 
your Orthman dealer.

This safety alert symbol warns of 
potential hazards to personal safety and 
that extra precautions must be taken.

!

Содержание 125-087-02-EN-OM































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды