ORTEC digiBASE-E, Руководство пользователя

Страница: 62 / 72

digiBASE-E ™ High-Performance Power-over-Ethernet Multichannel Analyzer / PMT Base for Scintillation Detectors
56
SHOW_PEAK_CHANNEL
This command returns the number of the ROI channel with the largest number of counts. An
ROI channel is a channel that has the ROI flag set. The lowest number ROI channel with the
largest count is reported if more that one channel contains the largest number of counts.
Responses:
$C00000087<CR>
Maximum count was found in channel 0 or no ROI
channels were found (see errors below).
$C00001088<CR> Maximum count was found in channel 1.
... ...
$C01023093<CR> Maximum count was found in channel 1023.
SHOW_ROI
Used in conjunction with the SHOW_NEXT command, SHOW_ROI reports the first
continuous group of channels that have the ROI flag set. The response is of the form
$Dsssssnnnnnccc<CR>
where sssss represents an integer number that is the number of the first channel of the “first”
group of channels that all have their ROI bit set, and nnnnn represents an integer number
that is the number of channels in the group. The SHOW_NEXT command is used to report
the “next” group of channels that all have their ROI bit set.
Responses:
$D0100000050078<CR>
First ROI group starts at channel 1000 and is 50
channels long.
$D0215000150086<CR> First ROI group starts at channel 2150 and is 150
channels long.
$D0000000000072<CR> No ROI groups to report.
SHOW_ROI_SAMPLE
Displays the ROI Sample setting. See also SET_ROI_SAMPLE.
Response:
$C00001088
SHOW_SEG
Returns the current segment number. Always 1 for the digiBASE-E.
SHOW_SHAP_FLAT
Reports the width of the flattop in
μ
s. See also SET_SHAP_FLAT.
Responses:
SHAP_FLAT 000000000000.64
Flattop setting 0.64
μ
s.