Ormed Artromot-F, Руководство по эксплуатации

Страница: 22 / 34

– Turn the power off before unplugging.
Unplug the power supply by grasping
the plug, not the cord.
– Use the ARTROMOT ® -F only in
accordance with the Physician
prescription and Setup and Operation
Manual. Failure to do so may result in
damage to the device and/or personal
injury.
– Position the device in a comfortable
and secure position. Ensure that the
device is stable through its full range
of motion.
– The device should not be used in the
presence of flammable anesthetics.
Do not use the device near exposed
flames, while smoking or near exten-
sive heat. Make sure that the device
is not exposed to water or extreme
temperatures.
– When in doubt regarding the correct
setting and programming, interrupt
the therapy immediately. Check the
device and contact Customer service
at ORMED GmbH & Co. KG if neces-
sary.
– Movement must always be free of
pain and irritation.
– The patient must be fully conscious
when being instructed and using the
device.
– To prevent potential physical injury,
such as strangulation and choking
hazards, keep the device away from
children or individuals with mental
or physical conditions that preclude
the safe use of the device.
– If the patients cannot operate
the hand-held programming unit ,
such as paralyzed persons or those
who have had operations on both
shoulders, specialists must constantly
supervise treatment.
– The doctor or therapist must decide
on a case-to-case basis whether the
device can be used with the particular
patient.
– Make sure that the characteristic
values of your power supply corre-
spond to the voltage and frequency
data indicated on the ID plate.
– Unless using the device, turn the
device off and unplug the power
supply.
– Only use brand-name batteries.
Do not use rechargeable batteries.
– Only authorized staff may perform
repairs and maintenance as the
manufacturer’s warranty and liability
would otherwise be invalidated.
– Check all of the components at least
once per year to see if there is any
damage or loose connections.
– Before cleaning and repairs, make
sure the mains plug has been dis-
connected.
– Do not pour cleaning liquids
directly onto the device. This may
allow fluids to enter the device and
cause electrical problems, or wash
lubricants away from running compo-
nents, reducing the life span of the
device
– Select the location for the device
and device components (controller,
straps, cables and power supply)
to prevent a tripping hazard during
use or storage.
– Keep hair, loose clothing, fingers
and all parts of the body away from
moving components of the device.
– Following accessories are for single
patient use only:
– glove
– silipos digital cap
– splint
20
English
PRECAUTION!
Please read before starting the
device!
PRECAUTION!
Allow the device to reach room
temperature for a minimum of
one hour prior to use.
3. Safety instructions