Page
2 / 19
1.
Technical data ............................................................................................... 4
2.
Layout of the heating installation .................................................................. 5
3.
Assembling the boiler ................................................................................... 5
3.1. Assembling the cast-iron boiler block ................................................................................ 5
3.2. Hydraulic coupling of the block to the installation .............................................................. 6
3.3. Mounting of the casing fixing plates .................................................................................. 6
3.4. Fixing the insulation ........................................................................................................... 6
3.5. Coupling of the boiler to the chimney ................................................................................ 7
3.6. Assembling the boiler casing ............................................................................................. 7
3.7. Fillingthe installation .......................................................................................................... 8
4.
Installation ..................................................................................................... 9
4.1. Connections to the chimney ................................................................................................... 9
4.2. Hydraulic connections ........................................................................................................... 9
4.3. Electrical connections .......................................................................................................... 12
5.
Description of the control panel ................................................................. 17
6.
Spare parts .................................................................................................. 18
7.
Maintenance ................................................................................................ 20
8.
Guarantee conditions on Optimajor GLP S................................................ 20
Page
Contents
User's advices
-
The boiler must be installed and commissioned by a registered installer in accordance with instructions
herewith.
-
It is important for the safe operation of the boiler that there is sufficient fresh air inlet and ventillation provided.
-
Maintenance of the boiler should be done once or twice a year, depending on the conditions of use.
-
It is inadvisable to regulary drain down the boiler as frequent additions of fresh water may bring about the
permature deterioration of the boiler fabric through the deposit of mineral substances present in the water.
-
Precautions must be taken to avoid any damage that might be caused by frost.
