Page
19 / 19
7. Maintenance
Maintenance of the boiler must be carried out once or twice per year, according to the conditions of use, by means of an
inspection of the cleanness of the flues. In order to do this, one must simply open the cast-iron door and work in this order:
first clean the horizontal flues, then proceed to the vertical flue sections and finally clean the combustion chamber.
Abnormal soiling of the furnace may be the result of :
- derangement of the burner
- obstruction of the chimney
It is recommended to have the regulation of the burner, the combustion characteristics and the proper functioning of the control
apparatus checked annually (by the filter).
8. Guarantee conditions for Saint Roch Couvin's products
1. Our products are guaranteed against all manufacturing defects, insofar as they have been used in normal conditions and
have been installed and maintained in the approved manner, according to prevailing regulations and in accordance with
the prescriptions of our technical services.
Our technical instructions must be adhered to and annual maintenance be undertaken by a qualified person.
Our guarantee does not cover damage to boilers which have been used with polluted air including corrosive elements such
as chlorine, fluorine, sulphur etc. The use of water which is found to be unsuitable would also invalidate our guarantee.
2. Our guarantee specified below commences on the date of delivery.
Its duration being as follows :
- Cast-iron block (i.e. the whole of the apparatus composing the heating block of the appliance): 3 years
- All other accessories and pieces of equipment supplied with the boiler are subject to individual manufacturers garantee.
3. The guarantee is restricted to either the repairing or the simple replacement - at our discretion - of any component sent
to our registered office free of charge and which we recognize to be defective, with the exclusion of any labour costs,
transport or travelling expenses and any damages or compensation whatsoever.
4. The replacement or repair of a component in the course of the period of guarantee will never result in the extension of this
period.
5. We will not accept any costs on account of the installation, which is entirely the responsability of the installer. Any visit
to site for any of the above reasons may be construed only as technical assistance and no way binding the manufacturer.
6. The manufacturer reserves the right to modify the technical and aesthetic characteristics of its products without notice.
7. For full details, please refer to our Term and Conditions of sale.
