Zone
Zone
INSTALLATION & WIRING
VCB-X Controller Field Technical Guide
40
Leaving Water Temperature Sensor Wiring
Figure 26: OE230 and OE233 Leaving Water Temperature Sensor Wiring Diagram
T2
VCB-X EM1
Expansion Module
Connect To
Expansion Module(s)
(When Used)
Connect To
Controller
VCB-X
Size Transformer
For Correct Total
Load. VCB-X E 1
Module = 5 VA
M
O 230 LEAVING WATER
E
TEMPERATURE SENSOR
WITH
91 IMMERSION
WELL - MOUNT IN LEAVING
WATER PIPE
OE2
GND
STRAP-ON O 233 LEAVING
E
WATER TEMPERATURE SENSOR
- MOUNT IN LEAVING
WATER PIPE
To T2
To GND
2
1
Leaving Water Temperature Sensor
The OE230 (with OE291 Immersion Well) or strap-on OE233
Leaving Water Temperature Sensor must be wired as shown in
Figure 26
below. The Leaving Water Temperature Sensor is a 10K
Type III thermistor sensor.
The Leaving Water Temperature Sensor should be mounted in the
leaving water piping. See
Figure 27
for installation instructions.
Revised 7/30/13
Содержание OE335-26B-VCBX-A
Страница 115: ...NOTES VCB X Controller Field Technical Guide 115...