Orion Combo 200, Руководство пользователя, Страница: 50 / 52

50
11. If using shielding gas, connect the gas tube into the gas port on the
back of the power supply.
12. Fill the water (follow water filling instructions, section 7.5 manual).
De-ionized water should be used.
13. Turn the welder power switch on the back of the welder clockwise to
turn on the welder.
14. Insert the key on the front of the power supply and turn it clockwise to
allow the welder to function.
15. Setup the microscope eyepieces.
16. Touch start on the touch screen user interface.
17. Set the welding parameters.
18. Look through the microscope eyepieces and bring your workpiece into
focus. (See ch 5 for eyepiece setup)
19. Line up the crosshairs on your workpiece where you want to weld.
20. Step on the foot pedal or press the thumb switch on the left hand grip
to initiate a weld.