19
ADJUSTING THE NAILING DEPTH
To assure that each nail penetrates to the same depth, be sure that the Nailer is
always held firming against the workpiece. If nails are driven too deep or shallow into
the workpiece, adjust the nailing in the following order.
(1) Remove the fuel cell and the battery from the Nailer
(2) If nails are driven too deep, turn the adjuster to the shallow side.
Adjustments are in half-turn increments.
If nails are driven too shallow,turn the adjuster to the deep side.
(3) Stop turning the adjuster when a suitable position is reached for a nailing test.
(4) Connect the fuel cell and the battery to the Nailer.
ALWAYS WEAR SAFETY GLASSES perform a nailing test.
Fuel cell
Battery
Too Deep
Too Shallow
Flush
Flush
Turn Adjuster
Turn Adjuster
