13
LOADING NAILS
WARNING
■
When loading nails into Nailer,
1) do not depress trigger;
2) do not depress push lever;
3) keep the Nailer pointed downward;
4) Keep your face,hands feet and other body
parts,as well as those of other persons away
from the nose muzzle to avoid possible injury
uasge and carrying.
Nail Feeding Step
(1) Press the lock lever and gently pull out the
magazine cover
(2) Set one or two nail strips into the magazine and
keep the rear of nails in contact with the silde groove.
(3) Slide the nail strip into the blade guide
(4) Confirm that nail strips is placed with slide guide
groove properly,then push magazine cover forward
to be latched.
(5) For GBN1850,always keep the point of nails in
contact with Groove,see Fig below.
NOTE:
■ Quietly push the feeder knob to bring the nail
feeder to the end of the magazine, loosen the
feeder knob let the nail feeder slowly forward
against the nail.
■ The nails shown in page 14 can be loaded onto
the side guide groove of the magazine without
any adjustment
■ Use nail strip of more than 4 nails.
The Nailer is now ready to operate.
Magazine
Lock lever
Magazine cover
Blade Guide
Gap
Side guide
groove
Nail
Groove
Magazine
