RGPS-92222GCP-NP Series User Manual
ORing Industrial Networking Corp.
73
security models include:
NoAuth, NoPriv
: no authentication and no privacy
Auth, NoPriv
: Authentication and no privacy
Auth, Priv
: Authentication and privacy
Read View Name
The name of the MIB view defining the MIB objects for which this
request may request the current values. The allowed string length is
1 to 32, and only ASCII characters from 33 to 126 are allowed.
Write View Name
The name of the MIB view defining the MIB objects for which this
request may potentially SET new values. The allowed string length is
1 to 32, and only ASCII characters from 33 to 126 are allowed.
5.6 Traffic Prioritization
5.6.1 Storm Control
There is a unicast storm rate control, multicast storm rate control, and a broadcast storm rate
control. These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present
on the MAC Address table.
The rate is 2^n, where n is equal to or less than 15, or "No Limit". The unit of the rate can be
either pps (packets per second) or kpps (kilopackets per second). The configuration indicates
the permitted packet rate for unicast, multicast, or broadcast traffic across the switch.
Note: frames sent to the CPU of the switch are always limited to approximately 4 kpps. For
example, broadcasts in the management VLAN are limited to this rate. The management
VLAN is configured on the IP setup page.
Label
Description
Frame Type
The settings in a particular row apply to the frame type listed here:
unicast
,
multicast
, or
broadcast
.
Status
Enable or disable the storm control status for the given frame
type.
Rate
The rate unit is packet per second (pps), configure the rate as 1K,
2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K, or 1024K.
