RGPS-92222GCP-NP Series User Manual
ORing Industrial Networking Corp.
28
Max Age Time(6-40)
The number of seconds a bridge waits without receiving
Spanning-tree Protocol configuration messages before attempting
a reconfiguration. The valid value is between 6 through 40.
Hello Time (1-10)
The time interval a switch sends out the BPDU packet to check
RSTP current status. The time is measured in seconds and the
valid value is between 1 through 10.
Forwarding
Delay
Time (4-30)
The time of a port waits before changing from RSTP learning and
listening states to forwarding state. The valid value is between 4
through 30.
Max Hops (1-40)
An additional parameter for those specified for RSTP. A single
value applies to all STP within an MST region (the CIST and all
MSTIs) for which the bridge is the regional root.
Apply
Click to apply the configurations.
Bridge Port
Label
Description
Port No.
The number of port you want to configure
Priority (0-240)
Decide which port should be blocked by priority in the LAN. The
valid value is between 0 and 240, and must be a multiple of 16.
Path
Cost
(1-200000000)
The path cost incurred by the port. The path cost is used when
establishing an active topology for the network. Lower path cost
ports are chosen as forwarding ports in favor of higher path cost
ports. The range of valid values is 1 to 200000000.
Admin P2P
Configures whether the port connects to a point-to-point LAN
rather than a shared medium. This can be configured
automatically or set to true or false manually. True means P2P
enabling. False means P2P disabling. Transiting to forwarding
