RGPS-92222GCP-NP Series User Manual
ORing Industrial Networking Corp.
17
1. Select two switches from the chain (Switch A & B) that you want to connect to the O-Ring
and connect them to the switches in the ring (Switch C & D).
2. In correspondence to the ports connected to the ring, configure an edge port for both of the
connected switches in the chain by checking the box in the management page (see 4.1.2
Configurations).
3. Once the setting is completed, one of the connections will act as the main path, and the
other as the backup path.
Switch A
Switch B
Edge port
Edge port
Switch C
Switch D
O-Ring
