S0-738 User Manual PAGE
：
4
43-S0-738 User Manual DATE:10-14-2008
41
ISO 9001 Certified
台 揚 企 業 集 團
MTI Group.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
outdoors, may I ask is that true?
¾
Express these values are the furthest distance transmission distance,
as a theoretical value, because in fact the user environment will be
different and a decrease in common reasons for weak wireless signals
are:
1.
Non-regularity of the radio waves communication
；
2.
Strong radio wave environment, such as high-voltage tower or unknown wave radiation
；
3.
The structure of the building and use of building materials
；
4.
Equipment placement locations
；
5.
Antenna azimuth
；
6.
Wireless access point or wireless Whether or not the receiving end at a corner inside the
building
；
AP shell feeling hot, may I ask are not machines have questions?
¾
AP is a sophisticated electronic equipment, the internal CPU and
wireless network chip module at a time when the operation would have
generated heat
，
Shell fever is a normal situation, no cause for concern;
recommend that you place the location of AP ventilation are conducive
to heat dissipation at the location, and definitely not to re-placed
in the AP top of other equipment.
Why do a very good signal quality but very low throughput
¾
Channel interference or how there is interference, solution is out
of the equipment and antenna interference zone or re-configure the
channel;
¾
Equipment Ethernet port have questions, check the Ethernet interface
Clients can not search to AP
¾
Change the location of wireless access point, try to adjust the location
of wireless access points as well as the direction;
